Quantcast
Channel: Automotive Repair Manual Download and Reviews » Search Results » fill line for coolant grand prix
Viewing all articles
Browse latest Browse all 10

Chrysler LHS Change the Coolant Instructions

0
0

Your Chrysler LHS might want to have the coolant utterly modified per your service manual schedule attributable to put on over time. You will need to change and flush the coolant recurrently to stop inadequate cooling and injury to the radiator. Altering the coolant is a reasonably simple job if care is taken and these steps are adopted totally.

Chrysler LHS Change the Coolant Instructions

1. Enable the engine to chill down fully earlier than starting this process.

2. Place the drip pan beneath the petcock situated on the left facet of the radiator at the backside.

3. Use a flat tip screwdriver to remove the screws holding the plastic cowl over the front of the radiator and protecting the cap. Take away the cowl and put aside.

4. Open the overflow cap positioned on the proper facet of the engine near the firewall.

5. Open the principal radiator cap situated at the left front of the engine compartment.

6. Use a crescent wrench, turning it counterclockwise to open the petcock valve and permit all the coolant to empty into the pan.

7. Empty the drain pan into an OSHA-approved drain barrel. These containers can be found at most auto components shops.

8. Place the drain pan again beneath the petcock valve and slowly pour 10 gallons of fresh water via the radiator. It will flush out any contaminants which will have accrued in the radiator.

9. Use a crescent wrench to shut the pet cockvalve hand tight.

10. Use the 50/50 coolant combine and fill the radiator slowly, permitting air bubbles to return out and the coolant to fill the radiator totally.

11. Shut the foremost fill cap and exchange the plastic cowl.

12. Begin your automobile and permit the engine to heat up till the thermostat opens. It is possible for you to to inform this when the level of coolant in the overflow container begins to drop. Use your remaining coolant to proceed filling the overflow container till it reaches the full line.

Read more : How to Change the Coolant on a Chrysler LHS


Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images